Metal Cutting Machine

Ecocut, Metal Cutting Machine   View All Products of this Supplier

We are offering Metal Cutting Machine Integral design with compact foot print Cutting speed : 70mm2/min 0.25Ø special soft brass wire on 50 mm thick HCHCr (steel) work piece)Best surface finish : 1.2 µ RaTaper : ± 5o/100 mm Hand held remote controle pluse technology.

Mexicute, Metal Cutting Machine   View All Products of this Supplier

We are offering Metal Cutting Machine. cutting speed: 120 mm2/min ( with 0.25 dia special soft wire on 50mm thick hchcr workpiece)best surface finish: 0.8 µ ra.taper ± 15o/100 mm.epulse technology.precision lm guides for x, y, u, v, z axestable size - 440 x 650 mm.

Sprintcut, Metal Cutting Machine   View All Products of this Supplier

We are offering Metal Cutting Machine Following are the features of sprintcut
4 axes cncprecision lm guideways for all axesmax. Cutting speed : 160mm2/min0.25ø special soft brass wire on 50 mm thick hchcr (steel) workpiece)best surface finish : 0.8 µ rataper : ± 30°/ 50 mm.

Mega Series (Mega 1 M), Metal Cutting Machine   View All Products of this Supplier

We are offering Metal Cutting Machine.(Mega 1 M)
X x Y : 550 x 450 mm Z :220 + 330 mmMax.workpiece weight : 1500 kgPulse generator in manual / ZNCWork tank : 800 x 500 x 350 mmWork tank available in different sizesMoving table, fixed columnZ-Axis with cross roller bearingsDC servo motor for Z-axis

Mega Series (Mega 2 ), Metal Cutting Machine   View All Products of this Supplier

We provide Metal Cutting Machine.(Mega 2)
X x Y : 550 x 450 mm Z :220 + 330 mmMax.workpiece weight : 1500 kgPulse generator in manual / ZNCWork tank : 800 x 500 x 350 mmWork tank available in different sizesMoving table, fixed columnZ-Axis with cross roller bearingsDC servo motor for Z-axis.

Mega Series (Mega 3), Metal Cutting Machine   View All Products of this Supplier

We are provide Metal Cutting Machine.(mega 3)
x x y : 1000 x 600 mm z : 450 mmmax.workpiece weight : 4500 kgpulse generator in manual / zncfixed table, moving columnx, y, z-axis with lm guidesx, y-axis motoriseddc servo motor for z-axisadaptive anti-arc control.

Ultima 2S, Metal Cutting Machine   View All Products of this Supplier

We provide Metal Cutting Machine, ultima 2s most compact footprintdirectly coupled ac servo motorswire spool capacity 8 kglarge surface area paper filter specially designed by mann, germanywide cross-section of wire guide armcentralised lubrication.

Ultima 1F, Metal Cutting Machine   View All Products of this Supplier

We provide Metal Cutting Machine most compact footprintdirectly coupled ac servo motorswire spool capacity 8 kglarge surface area paper filter specially designed by mann, germanywide cross-section of wire guide armcentralised lubrication.

Metal Cutting Bandsaw Machine   View All Products of this Supplier

We are offering metal cutting bandsaw machine etc. If you are on a look out for some excellent metal cutting machinery, then we are your appropriate destination. We are the tagged as one of the widely appreciated metal cutting hacksaw machine suppliers based in india. So we bring forth to customers our metal cutting machine that is simply peerless in its quality. All our easy to operate machineries use latest technology to make the cutting work easier.

Billet Shearing Machine   View All Products of this Supplier

Bloom Cutting / Shearing Machines
For Cutting of Bloom / billets Upto 225 x 225 mm, & MS / SS Slab Upto 450 x 125 mm (Weight of Machines upto 125 MT)

Scrap Shearing Machine   View All Products of this Supplier

Re-Roll able Material / Scrap
Shearing Machine
For Girders, Channels, Rounds, Flats, Rails Plate, Squares, Angles, & Various Other Steel

Rotary Shearing Machines   View All Products of this Supplier

Rotary Shearing Machines
(Swivel Type)

Rotary Shearing Machines   View All Products of this Supplier

Rotary Shearing Machines (Fix Type)
For cutting of squares, Bars etc.

Cut Off Machines   View All Products of this Supplier

We are a customer-oriented business house which is devotedly engaged in the manufacturing of all sorts of metal cutting machines. In addition to this, we are specialized in the manufacturing of all class of metal cutting bandsaw machines. Jeet machine tool corporation is one of the well-known metal cutting bandsaw exporters, originated in india. Our metal cutting bandsaw machines are ubiquitously appreciated for their high level of strength. Reliability and durability are some of the salient features of our products.

Universal Section Cutter   View All Products of this Supplier

We are a customer-oriented business house which is devotedly engaged in the manufacturing of all sorts of metal cutting machines. In addition to this, we are specialized in the manufacturing of all class of metal cutting bandsaw machines. Jeet Machine Tool Corporation is one of the well-known metal cutting bandsaw exporters, originated in India. Our metal cutting bandsaw machines are ubiquitously appreciated for their high level of strength. Reliability and durability are some of the salient features of our products.

Metal Cutting Bandsaw - Horizontal   View All Products of this Supplier

We are a customer-oriented business house which is devotedly engaged in the manufacturing of all sorts of metal cutting machines. In addition to this, we are specialized in the manufacturing of all class of metal cutting bandsaw machines. Jeet machine tool corporation is one of the well-known metal cutting bandsaw exporters, originated in india. Our metal cutting bandsaw machines are ubiquitously appreciated for their high level of strength. Reliability and durability are some of the salient features of our products.

Foot Actuated Machine   View All Products of this Supplier

We are a customer-oriented business house which is devotedly engaged in the manufacturing of all sorts of metal cutting machines. In addition to this, we are specialized in the manufacturing of all class of metal cutting bandsaw machines. Jeet machine tool corporation is one of the well-known metal cutting bandsaw exporters, originated in india. Our metal cutting bandsaw machines are ubiquitously appreciated for their high level of strength. Reliability and durability are some of the salient features of our products.

Reel To Sheet Cutting Machine (SKS 3)   View All Products of this Supplier

We provide the clients Reel To Sheet Cutting Machine (SKS 3) that is designed for high production and accurate cutting of sheets or 2ply corrugated board without damaging flutes and liner paper with the help of automatic jogging attachment.

Specifications

Model No. : SKS - 3

BodyThis strongly design machine can be used as an independent unit to a corrugation machine for direct and accurate sheet cutting by rubber roll.It reduces the percentage of wastage as a result to minimize with high production capacity.
Setting ActionIt is gear operated for adjusting of sheets to the required length from 5” to 118” according to size chart.

Reel To Sheet Cutting Machine (SKS 2)   View All Products of this Supplier

We are into dealing with the best quality Reel To Sheet Cutting Machine (SKS 2) that is designed for high production and accurate cutting of sheets or 2ply corrugated board without damaging flutes and liner paper.

Specifications

Model No. : SKS – 2

BodyThis strongly design machine can be used as an independent unit to a corrugation machine for direct and accurate sheet cutting by rubber roll.It reduces the percentage of wastage as a result to minimize with high production capacity.
Setting ActionIt is gear operated for adjusting of sheets to the required length from 5” to 118” according to size chart.Set of gears consisting 22 Nos.

Gerber Cutters   View All Products of this Supplier

We are offering gerber cutters.

Plate Cutting Shearing Machine   View All Products of this Supplier

We offer plate cutting shearing machine.

Cnc Laser Metal Cutting Machine   View All Products of this Supplier

We are offering Cnc Laser Metal Cutting Machine etc. CNC Laser Metal Cutting Machine is widely used to make Advertising Board and Sheet Metal Structure. It is extremely useful in the high and low voltage electric cupboard industry, spare parts of Textile Machines, Hardware, Metal Handicraft Article, Kitchen wares, Cars, Machines, Elevators, spare parts of electric devices, spring pieces, and spare parts of subway and so on.

Bar Cutting Machine   View All Products of this Supplier

We are offering Bar Cutting Machine.
Make : ISE Make
Model No. : B.C-42
Cutting Diameter of Steel Bar : 42mm
Motor Power : 4Kw
Rotation speed of motor : 2880r/min
Weight : 600kg
Blade thickness : 90×90×20(mm)
Over all dimension:1420×460×840(mm)

Heavy Duty Cutter   View All Products of this Supplier

We offer Heavy Duty Cutter.
Part no. F 002 g30 053
wheel dia. : 125 mm
max. Cutting depth : 40 mm
power input : 1300 w
no-load speed : 13000 rpm
weight : 3 kg

Chop Saw / Cut-off Saw Solid Bar And Pipes Cutting   View All Products of this Supplier

We offer metal cutting cut-off saw / chop saw and also supply necessary spares and accessories like abrsive cut-off wheels, teethed blade etc.

Metal Cutting Machine   View All Products of this Supplier

We offer Metal Cutting Machine. it is suitable to lamp, advertising, hardware, kitchenware and metal processing industries
such as cutting and welding of knives, sheet metals

Industrial Plasma Metal Cutting Machine Jcut-1325   View All Products of this Supplier

We are Offering Industrial Plasma Metal Cutting Machine Jcut-1325. this Machine is Mainly Used for Metal Cutting, Its Maximum Metal Cutting Thickness is 30mm.

Industrial Plasma Metal Cutting Machine Jcut-1530   View All Products of this Supplier

This Machine is Mainly Used for Metal Cutting, And Its Maximum Metal Cutting Thickness is 30mm.

Metal Laser Cutting Machine   View All Products of this Supplier

China Listed Manufacturer of Laser Equipment, Yag Metal Laser Cutting Machine for Sheet Metal, Carbon Steel, Stainless Steel, Alloy Steel, Aluminum, Alloys, Aluminum Sheet Etc.

Metal Cutting Machine   View All Products of this Supplier

We are Offering Oxy-gasoline Flame Welding Cutting Machine
1.oxy-gasoline Substitute Oxy-acetylene
2.save 80% Cost Compared with Ace.
3.ce Certificate & Iso9001:2000
4.simple & Fast Operating

Hydraulic Swing Beam Shearing Machine   View All Products of this Supplier

Nc Control Power Back Gauge.
stroke Adjustable.
illumination Line Watching.
roller Ball Moveable Bed.
hchc Blade.
capacity 6.5mm X 3100mm

hold-downs 10

main Motor 10hp

stroke per Min.16

rake Angle 1.3 Degree

standard Equipment:
* One Pair of High Grade Alloy Tool Steel Blade Equipped with Machine.
* Remote Foot Pedal Switch.
* Front Operated Nc Power Back Gauge.
* Working Numbers Counter.
* Power Rake Angle Adjustment.
* Illumination Lighting Device.
* Safety Finger Guard in Front of Blade.

Cnc Metal Laser Cutting Machine -fal-c4115-600   View All Products of this Supplier

We are Offering Fal-c4115-600 Cnc Metal Laser Cutting Machine, It Incorporates Cad, Cnc and Laser Technology, Which is Computer-designed and Auto-control Completely. It is Characterized By Small Heat-affected Zone, High Accuracy, Perfect Cutting Performance, No Need Further Polishing. the Equipment is Welcomed in the Field of Billboard Advertising Production, Metal Plate Structure, High& Low Voltage Electronic Cabinet Making, Textile Machinery Parts, Kitchen Utensils, Automobiles, Machinery, Elevators, Electrical Parts Industry, Etc.

Circular Saw Saw   View All Products of this Supplier

METAL CUTTING BANDSAW

Crocodile-type Shearing Machine   View All Products of this Supplier

We offer Crocodile-type Shearing Machine.
Q43 series crocodile-type hydraulic metal shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold shear section steel and metallic structural parts into acceptable furnace charges.

Crocodile-type Hydraulic Metal Shearing Machine   View All Products of this Supplier

We offer Crocodile-type Hydraulic Metal Shearing Machine.
q43 series crocodile-type hydraulic metal shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold shear section steel and metallic structural parts into acceptable furnace charges.

Q43 Series Crocodile-type Hydraulic Scrap Metal Shearing Machine   View All Products of this Supplier

We Offer Q43 series crocodile-type hydraulic metal shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold shear section steel and metallic structural parts into acceptable furnace charges.

Q43 Series Crocodile-type Shearing Machine/ Hydraulic Metal Shearer   View All Products of this Supplier

We Offer Q43 series crocodile-type hydraulic metal shears are applied in recycling companies, automobile dismantling plants, smelting & casting industry to cold shear section steel and metallic structural parts into acceptable furnace charges.

Cnc Plasma Cutting Machine   View All Products of this Supplier

We are offering cnc plasma, cnc cutting machine, cnc router, cnc plasma, cnc laser, cncmachine, engraving machine, carving machine, carver, engraver laser engraver, laser engraving machine, woodworking machine, advertising machines, cnc engraving machine. Model rp1103
max. Cutting area (mm) 1270×2540
z-axis move (mm) 160
max. Speed (mm) 35
positioning precision+/-(mm/pulse) 0.025
repeatability (mm) 0.025
shipping terms:fob or cif
payment terms:tt or lc

Horizontal Band Saw Machine   View All Products of this Supplier

We Offer Horizontal Band saw machine.
GZ4240, G4240 column horizontal bandsaw machine is mainly used to cut various ferrous and nonferrous metals. It is characterized by narrow cuts, material and energy saving, high accuracy, easy operating, high efficiency good rigidity. The machine is equipped with the automatic material feeding system.
1. The saw bow don’t feed when workplace isn’t be clamped.
2. The machine will stop in case of blade broken or stuck.
3. The digital display unit show cutting length, min length 1 mm.
4. Automatic cuts counting to stop machine when finished the preset cutting number.